Skip to main content

ECP Plastic Trays

Your Source for Thermoformed Plastic Trays & Molded Pulp

Plastic Trays
Electronic Parts Trays
Small Cavity Trays
Electro-Pak ESD Trays
Conductive Trays
TY Antistatic Trays
ESD Tacky Trays
Static-Safe Boxes
Custom Anti-Static
Adjustable PCBA Tray
Antistatic Clamshells
Heavy Duty Trays
Tray Finder
Custom Packaging
Overstock Trays
Sustainable Packaging
Technical Information
Case Studies
Who We Are
Contact Us
Site Map
In Stock                   Packaging Trays for Electronic Parts                    In Stock
Related Product Links
Tray FINDER          Heavy Duty Trays          Custom Trays        Material Info

Trays for electronic parts packaging including Anti-Static, ESD, and Conductive plastic trays.  Trays for packaging electronics are available in Anti-static PETG, ESD PVC, Conductive HIPS, Antistatic HDPE, and conductive HDPE. 
       Electro-Pak  Plastic Trays

12.5" X 5.5"  Anti-Static Trays

Heavy-Duty Plastic Containers

Anti-Static Plastic Stacking Bins

Conductive Corrugated Boxes

for Static Safe Corrugated
     Fit-Right AS   Plastic Trays

  Anti-Static Pink Foam Trays

Made to Order Plastic Trays

DETAILS   (Links to specific product page above).

Custom Built Anti-Static trays:  If the standard sizes do not fit your application, custom options are available. At our Design
Center, we will design a custom tray to meet your requirements. Our raw material suppliers are the
best in the industry and regularly run static disappative materials. Specify the surface conductivity and we will manufacture trays to meet requirement whether material is ESD, Static Disapative, Anti-Static, or Conductive.

Facility is ISO 9001 Certified with traceability on material and parts including time and date stamps.  Materials can range from .007" thickness to .080" thickness with a range of anti-static or conductive materials available.   Rolls are used for higher volume applications.

Right-Fit:  Anti-Static material is stock and is run on any of the 250 molds.  No mold cost and low minimum of 25 trays.

Heavy-Duty Plastic Containers: Conductive containers are black because the material contains carbon black. The carbon black allows containers to conduct, and therefore if grounded, they will not create an ESD moment. The conductivity of the containers is a permanent part of the high density polyethylene material used to manufacture the containers. There is, however, a tendency for minute particles of the carbon black to slough. This trait may make the containers unacceptable in certain clean rooms. To ensure that the containers are conductive and meet the specification MIL-B81705B, we test the surface resistivity to make sure that it is 105 or less ohms per square inch.

TY-Series Anti-Static Trays: Trays are made from thin gauge PVC material for shipping small electronic parts.   Ideal electronic product packaging.  Dozens of pocket configurations are available including 200, 150, 100, 75, 50, and 35 pocket trays.  Overall size for all tray configurations is 8.75" X 11.5".  Material:  PVC Clear(.020" starting thickness)   Rating: Anti-static to EIA-541.

Heavy-Duty Series Storage and Inspection Trays:  Anti-static trays are generally blue containers. A charge of 5000 volts is fully decayed in less than 2 seconds. This material requires a relative humidity of 15% or greater.  The advantage of this material is that it does not slough conductive particles and is therefore usable in clean room situations.  Containers meet the minimum specifications per MIL-B-81705B. The base material, high density polyethylene, has high impact strength. To ensure that the containers are anti-static, we test the surface resistance. It must be less than 1012 ohms per square inch.

Foam-AS Series Trays
Trays are manufactured from Anti-Static Polyurethane and Polyethylene foam.  Both materials are stock.  Die cut pockets are mounted to flat sheet of anti-static polyethylene.  Conductive materials including crosslink polyethylene foam available upon special order.  Trays are custom with minimal tooling required.  Usually 1 steel rule die is needed.  Any size or pocket configuration.

Static Safe Corrugated Boxes: 
Heavy duty conductive coated corrugated for in plant handling, and storage of printed circuit boards and related products.   100's of pocket sizes made for varying size PCB or electronic parts packaging.  This is an inexpensive and reusable option.   Static safe shipping boxes with dividers are also noted in this area.

We are regularly adding innovative packaging products.  Bookmark this online catalog @

Focus on customer service:Contact us for a quote, product info, or recommended solutions to your packaging needs. We believe the website is a valuable tool, but as important is customer service. Call or e-mail for assistance.  Servicing North America; with on site sales support in NY, PA,CT, MA, VT, NJ, OH, & Ontario Canada.

Learn more about our packaging engineering support in the  Who We Are  section

Engineered Components & Packaging, LLC

Sales/Customer Service
Phone:  (585) 204-6770
Fax:      (888) 315-8124
Skype: ECP.Engineering